Menu sản phẩm

Hỗ trợ trực tuyến


Sale & Tech Support
tu@pitesvietnam.com
0979.349.375

Thăm dò ý kiến

Bạn quan tâm đến yếu tố nào khi lựa chọn Flowmeters Vietnam?

1. Chất lượng, 0 votes (0 %)

2. Giá cả, 0 votes (0 %)

3. Phong cách phục vụ, 0 votes (0 %)

4. Thân thiện, 1 vote (100 %)

Total votes: 1

Thống kê website

Thành viên online
- Đang online 5
- Khách 5
- Thành viên 0
- Lượt truy cập 2140571

Bảng giá

ALTM Turbine Flow Meter Smart Measurement, Flowmeter Smart Measurement

Đăng bởiAdmin

Tin trước << >> Tin Sau

PITESCO Việt Nam - Công ty XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp. Chúng tôi đáp ứng xu hướng công nghiệp hóa, hiện đại hóa.

Liên hệ cho chúng tôi theo số 0123 616 8679 để CÓ thông tin mà Quý khách CẦN.

Email : vinhch.pitesco@gmail.com Web : www.pitesvietnam.com
PHÂN PHỐI HÀNG TRÊN TOÀN QUỐC

Turbine Flow Meter - Axial Turbine Meter
[ALTM]

ALTM turbine flow meters (hereinafter referred to as turbines) are used for the precise measurement of instantaneous flow rates of low- viscosity fluids as tap and demineralised water, fuels, liquefied gases, light fuel oils, solvents, and pharmaceutical fluids. Turbine flowmeters measure volumetric flow, where fluid passing through the meter body is measured by the mean velocity of the flowing fluid media. Flow rectifiers ensure a laminar flow in the axial direction of the wheel. A low-mass turbine wheel carried concentrically within the meter body is rotated by the fluid. The RPM of the turbine wheel is directly proportional to the mean flow rate within the meter body and directly corresponds to the volumetric flow over a wide range.

Process Connections	BASF flanges up to 58,000 psig (4,000bar) (ANSI and DIN), dairy or tri-clamp, FNPT
Operating pressure	-460 ~ 660°F (-273 ~ 350°C)
Flow rates	0.008-0.2 GPM (0.03-0.8 LPM) - smallest size ½" (15mm) 115-6,600 GPM (430-25,000 LPM) - largest size 10" (250mm)
Accuracy	±0.15%
Viscosities	1 to 60 cSt
Weight	Small Sizes: 4 to 35 lbs (2 to 16 kg)Large Sizes: 25 to 340 lbs (11 to 155 kg)Electronics: 0.5 to 5.5 lbs (0.25 to 2.5 kg)
Material	Stainless Steel as per DIN (AISI)Body: 1.4305 (1.4571 with flange) - (316 Ti) - specialInternal Parts: 1.4305 (303) - standard, 1.4571 (316 Ti)Wheel: 1.4122 (303) - standard, 1.4460 (329) - specialBearing: Tungsten carbide or teflon
Supply Voltage VB (blind pulse amplifier)	+8.5 up to 29 V_DC, regulated; < 5 mA current draw
Frequency Range (blind pulse amplifier)	2 up to 4,000 Hz
Max. process temperature (blind pulse amplifier)	250 °F with a distance of at least 1" between flowmeter and electronic housing; 300 °F w/ at least 2½"
Integral LCD display option	8 digits (14 segments), digit height ¼" (7mm) for real-time value, totals and programmable
Supply Voltage (LCD display option)	14-30 V_DC controlled,VB = (Rload x 20 mA) + 14 V
Analog output (LCD display option)	2-wire (4-20mA); 12 bit (3.9 µA) resolution
Frequency output (LCD display option)	f_max: 3,000 Hz, duty cycle: approx. 1:1,
Process temperature (LCD display option)	-40~ 248 °F (-40~120 °C) w/ a distance of ≥ ½" (15 mm) between flowmeter and electronics
Ambient temperature (LCD display option)	-40 up to 158 °F (-40 up to 70 °C)
Housing	IP 65, aluminum AlMgSiPb, blue anodized
Ex-protection	II 2 G Eex ia IIC T4, BVS 03 ATEX E 205