for measurements from 0...10 and 0...16 bar with accuracy of full scale max. 1% or max. 0,5%.

for measurements from 0...40 bar with accuracy of full scale max. 1% or max. 0,5%.

for measurements from 0...1.6 bar absolute with accuracy of full scale max. 0,5%.

for measurements from 0...100 bar with accuracy of full scale max. 0,5 %.

for measurements from 0...250 bar with accuracy of full scale max. 0,5 %.

for measurements from 0...400 bar with accuracy of full scale max. 0,5 %.

for measurements from -1...+15 bar with accuracy of full scale max. 0,5%.

for measurement of differential pressure 0...400 mbar with accuracy of full scale 0.075%.

is the advancement of the proven LD 300 and even the smallest leakages can be detected even from distances of several meters.

The set includes a robust impact-proof transportation case which contains all necessary components and accessories.

With the integrated camera it is possible to take photos of the leakage areas. A software allows simple report generation on your computer. Available end of 2017.

in measurement of compressed air and gases. ATEX version available for applications in explosive areas.

The measuring sections are available in flanged version or with R resp. NPT thread.

RS 485 interface, Modbus RTU, 4...20 mA analogue output for m³/h, Pulse output for m³.

Our flow meter for compressed air and gases with newly developed evaluation electronics records all measured values digitally.

The PI 500 is an all-purpose hand-held measuring instrument for many applications in the industry.

consisting of: Chart recorder DS 400 and flow sensor VA 500

available in a robust housing with and without display. Depth scale for accurate installation. Usable from 1/2" to 12" (DN 300).

Intelligent solutions for flow measurement of compressed air and gases. With and without flange available.

Up to 12 optional sensors can be connected. 7" colour screen with touch panel.

Energy analysis according to DIN EN ISO 50001, flow measurement, leakage calculation at compressed air systems.

3.5" graphic display with touch screen. Option integrated data logger. Up to 4 sensor inputs. Option Ethernet / RS 485 interface.

for energy analysis, flow measurement, leakage calculation at compressed air systems.

serves for determination of the flow direction of compressed air and gases especially in closed circular pipelines and detects smallest changes <0.1 m/s.

Measuring section made of stainless steel 1.4301 incl. ball valve, up to DN 65 (R2 1/2") with external thread, from DN 80 with weld neck flange according to DIN 2633.

If there is no measuring site with 1/2" ball valve present it can be set up by means of spot drilling collars.

By means of a special drilling device a measuring site with 1/2" ball valve can be easily set up within a few minutes.

The supplementary device "high-pressure protection" serves for a safe installation and fastening of the CS sensors VA 400 under pressure.

enables a quick, easy and accurate measurement of the wall thickness of pipes.

is the ideal portable service instrument for dew point measurement for all types of dryers down to -80°Ctd dew point.

disposes of all functions of DP 500 and has a additional freely assignable sensor input.

Ideal for the monitoring of refrigeration or adsorption dryers.

Ideal instrument for dew point measuring for all kinds of dryers.

for residual moisture measurement after desiccant dryers/ membrane dryers from -80 to 20°Ctd. New: with Modbus-RTU interface.

with the digital process meter DS 52 and the dew point sensor FA 510 with a measuring range from -80 to 20°Ctd.

From -20 to 50°Ctd. New: with Modbus-RTU interface.

with the digital process meter DS 52 and the dew point sensor FA 510 with a measuring range from -20 to 50°Ctd.

from -80 to 20°Ctd. Extremely long-term stable. Analogue output 4...20 mA.

The measuring range of -80...20°Ctd makes the DS 52-set with alarm the ideal dew point monitor with analogue output 4...20 mA.

from -20 to 50°Ctd. Extremely long-term stable. Analogue output 4...20 mA.

The measuring range of -20...50°Ctd makes the dew ponit set DS 52 with alarm the ideal dew point monitor with analogue output 4...20 mA.

is the ideal instrument for dew point measuring for all kinds of dryers.

FA 300-2 measures the dew point resp. the pressure dew point in explosive areas of Zone 1. Protection class: FA 300-2 Ex: I 2G Ex ia II C T4.

for compressed air up to 16 bar

for compressed air up to 350 bar

up to 250 mbar

is screwed onto the dew point sensor and therefore enables an easy and low-priced possibility for on-site control and calibration down to -20°Ctd.

in gases / air up to 100 bar