EtherNet/IP to Siemens Industrial Ethernet Communication Gateway

Model: PLX31-EIP-SIE

Price : Contact Us

EtherNet/IP to Siemens Industrial Ethernet

PLX31-EIP-SIE

   The EtherNet/IP to Siemens Industrial Ethernet gateway offers bi-directional data transfers between the Siemens Industrial Ethernet and EtherNet/IP networks. Our EtherNet/IP Driver uses Class 1 I/O connections or Class 3 Message instructions. Our Ethernet Industrial Ethernet Driver uses Multiple Clients and Servers for faster data throughput. Protocol conversion gateways are the ideal solution for distributed networks when adding a remote rack becomes too costly.

    The PLX31-EIP-SIE gateways are stand-alone DIN-rail mounted modules that provide one Ethernet port for communication, allowing for remote configuration and diagnostics. The PLX30 gateways also come with an SD Card slot (SD card optional) for storing configuration files. In the event of a failure the SD card can be transferred to another gateway reducing downtime. These gateways also come with a wide input power range (10 Vdc – 36 Vdc), and an extended temperature range (-25°C to 70°C ). The PLX30 gateways include all the necessary cables required for communication.

Features and Benefits

• 4000 Word database
• Multiple I/O Connections
• Status data
• Node Health
• 10/100 Mb Ethernet port with Auto Cable Crossover Detection

• Hardware

  Specification	Description
  Power Supply	24 Vdc nominal 10Vdc to 36 Vdc allowed Positive, Negative, GND Terminals
  Current Load	24 Vdc nominal @ 300mA 10 to 36 Vdc @ 610mA maximum
  Operating Temperature	-25°C to 70°C (-13°F to 158°F )
  Storage Temperature	-40°C to 80°C (-40°F to 176°F )
  Relative Humidity	5% to 95% RH with no condensation
  Shock	IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational) IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operational)
  Vibration	IEC 60068-2-6; 5G @ 10Hz to 150Hz
  Dimensions (Height x Width x Depth)	Standard: 5.38 in x 1.99 in x 4.38 in (13.67 cm x 5.05 cm x 11.13 cm)
  LED Indicators	Configuration (CFG) and Error (ERR) Communication Status Power (PWR) and Hardware Fault (FLT) Network Status (NS) EtherNet/IP Class I or Class III Connection Status Module Status (MS) Module Configuration Status Ethernet Communication Port Link/Activity and 100mbit Serial Communication Port Receive (RX) and Transmit (TX)
  Ethernet Port	10/100 Base-T half-duplex RJ45 Connector Electrical Isolation 1500 Vrms at 50 Hz to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC 60950: 1991 Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration
  Serial Port(S)	Note: The number of serial communication ports depends on the gateway type, and the combination of protocols.
  Serial Port Isolation	2500 Vrms port signal isolation per UL 1577 serial port communication signal uses RF(Radio Frequency) modulation signal as isolation media, IC chip model is SiliconLabs Si844x(Si8440,Si8441,Si8442).
  Shipped With Each Unit	2.5 mm screwdriver, PLX30 DVD, J180 Power Connector, (1 to 4) RJ45-DB9M Serial Adapter Cable (serial protocol), (1 to 4) DB9 to Screw Terminal Adapter (serial protocol), 5’ straight-through Ethernet cable (grey)

• Downloads

  PLX30 EtherNetIP Datasheet	449.60 kB	Last Modified 02/22/2013
  ProSoft Configuration Builder (PCB)		Last Modified 03/18/2014
  PLX3x User Manual	4.44 MB	Last Modified 09/17/2014
  PLX30 EthernetIP-MBTCP EDS File	25.81 kB	Last Modified 06/25/2013